Wissenschaftliche Konferenz - engineered transparency

EXPERT KNOWLEDGE

Konferenzübersicht

Konferenzort: Halle 10 / C18-F18

Zeit

Opening lectures

9:45 h

Opening

Jens Schneider and Bernhard Weller

10:00

Against the Thin Skin, Glass as Thick Materiality of Light

Chris McVoy, Steven Holl Architects

10:30 h

The CEN-TS “Structural Glass – Design and Construction Rules” as pre-standard for the Eurocode

Markus Feldmann, RWTH Aachen University

11:00

Coffee break

Zeit

Session 1 (Raum 2)

Session 2 (Raum 1)

Session 3 (Raum 3)

11:30 h - 13:00 h

Facade – Architectural Design

11:30
All-glass entrance pavillion for an office building in Madrid
Jordi Torres, Bellapart

11:50 h
Studies on glass facades morphologies
Marcin Brzezicki, Wroclaw University of Science and Technology

12:10 h
Double-Skin Facades: Boundary Conditions, Challenging Examples and Developments
Xénia Cseh, seele

12:30 h
A new building envelope – increasing daylight and energy efficiency with water flow glazing
Daniel Pfanner, Bollinger + Grohmann Ingenieure

Glass – Standardisation and Design

11:30 h
Comparison of IGU-design according to German and European Standard
Geralt Siebert, Bundeswehr University Munich

11:50 h
Comparison of LSG-design according to German and European Standards
Geralt Siebert, Bundeswehr University Munich

12:10 h
Different methods for the calculation of laminated glass: pros and cons in the prospective of standardization
Gianni Royer-Carfagni, University of Parma

12:30 h
Micromechanically-motivated calibration of partial material factors for glass strength for the new structural Eurocode
Gianni Royer-Carfagni, University of Parma

Glass – Composites and Coatings

11:30 h
A Systematic Approach for Dimensioning Elastic Adhesive Joints with Complex Geometries
Thomas Scherer, Kömmerling Chemische Fabrik

11:50 h
Bonding Quality of Joined Glass Components Exposed to UV and Fluidic Influences
Christin Sirtl, Bauhaus University of Weimar

12:10 h
Crack nucleation in hyperelastic adhesive bonds
P.L. Rosendahl, Technische Universität Darmstadt

12:50 h
Racking stiffness and strength of cold-formed steel frames braced with adhesively bonded glass panels
Bert Van Lancker, Ghent University

13:00

Lunch Break

14:00 h - 15:30 h

Facade – Structural Design

14:00 h
Climate Change and its Influence on Glazed Curtain Wall Design
Daniel Arztmann, Schüco International, Detmold School of Architecture and Interior Architecture

14:20 h
Open BIM – Driving force for a new culture and new possibilities in facade business
Timo Bühlmeier, Josef Gartner

14:40 h
Annual heat demand comparisons based on modification of windows and volumetric design of passive houses
Abbas Rahmani, Karlsruher Institut für Technologie (KIT)

15:00 h
Benefits of optical distortion measurement – How Moiré technology drives the efficiency of glass production chains
Bertrand Mercier, ISRA VISION

Glass – Structural Design

14:00 h
Design of statically indeterminate reinforced glass beams: accounting for system action
Kenny Martens, Ghent University

14:20 h
Testing Procedure and the Effect of Testing Machinery on Four-Point Bending of Curved Glass
Paulina Bukieda, Technische Universität Dresden

14:40 h
The geometrical properties of random 2D Voronoi tesselations for the prediction of the tempered glass fracture pattern
Navid Pourmoghaddam, Technische Universität Darmstadt

15:00 h
Flaws and cracks stability in strengthened glass by residual stress
Guglielmo Macrelli, Isoclima SpA – Science Division

Glass – Composites and Coatings

14:00 h
Development of a mobile device for the evaluation of the current in-situ stress condition in glass – Experimental and numerical analysis for bonded and mechanical joints
Benjamin Schaaf, RWTH Aachen University

14:20 h
Laminated glass with phosphorescent interlayer
Stefan Reich, Anhalt University of Applied Sciences

14:r0 h
Modelling of Adhesive Bonding
Kai Koschecknick, Universität Siegen

15:00 h
Laminated Glass with Stiff Interlayers – Glass Canopies with Spans up to 1.2 Meters
Julian Hänig, Technische Universität Dresden

15:30

Coffee break

16:00 h - 17:20 h

Solar Technology

16:00 h
Energetic capability of a photovoltaic thermal collector in the facade
Christian Popp, Technische Universität Dresden

16:20 h
Translucent wall elements with switchable U- and g-value
Nikolaus Nestle, BASF SE Advanced Materials and Systems Research


16:40 h
Solar thermal energy from opaque and semi-transparent facades – current results from R&D project ArKol
Paul-Rouven Denz, Priedemann Facade-Lab

17:00 h
Structural sealant glazing with architecturally designed photovoltaic modules
Karoline Fath, Ed. Züblin AG

Glass – Structural Design

16:00 h
Facade Brackets for Blast Enhancement
Frank Wellershoff, HafenCity University Hamburg

16:20 h
Design and Constructing with Curved Glass
Thiemo Fildhuth, Knippers Helbig

16:40 h
Bent glasses with small bending radii for the use in modern facades
Tobias Rist, Fraunhofer Institute for Mechanics of Materials IWM

17:00 h
Comparative analysis of the glass plate design
Nebojsa Buljan, Andrej Vorkapic, Ivana Rakic

Facade – Projects

16:00 h
Optimized Adhesive for Structural Sealant Glazing in Blast Scenarios
Viviana Nardini, Sika Services


16:00 h
Fixed sunshade device for overhead glazing
Daniel Kleineher, kleineher+partner

16:00 h
Light Transparency
Michael Schumacher, schneider+schumacher

16:00 h
Fully loadbearing all glass skin for the Audemars Piguet watch museum
Philippe Willareth, Lüchinger Meyer Hermansen

18:00

gtl Tour

18:30 - 22:30

get together

Konferenzort: Halle 10 / C18-F18

Zeit

Opening lectures

9:45 h

Opening

Jens Schneider and Bernhard Weller

10:00

Performative and regenerative: Facade Ecosystems

Jan Wurm, Arup

10:30 h

Developments in Structural Glass, Past, Present and Future

Rob Nijsse, Delft University of Technology

11:00

Coffee break

Zeit

Session 1 (Raum 2)

Session 2 (Raum 1)

Session 3 (Raum 3)

11:30 h - 13:00 h

Facade – Structural Design

11:30 h
Bracing Timber-glass-facade | Feasibility studies, performance assessments and optimization
Alireza Fadai, Vienna University of Technology

11:50 h
The Electricity Generating Window of the Future
Sadiq van Overbeek, Physee

12:10 h
Electrically heatable Low-E glass
Timo Saukko, Finnglass Oy

12:30 h
Application of silicone technology in curtain wall facade to improve thermal performance
Valérie Hayez, Dow Silicones Belgium

Special Session – Thin Glass

11:30 h
Development of Thin Glass-Polycarbonate Composite Panels
Sebastián Andrés López, Universität Siegen

11:50 h
Kinetic Omni-Stable Structural Forms Using Ultra-Thin High-Strength Glass for Envelope Applications
Peter Lenk, Arup

12:10 h
Theoretical development of suitable test scenarios for the determination of the bending tensile strength of thin glass with or without influence of edges and their experimental implementation
Jürgen Neugebauer, University of Applied Sciences FH

12:30 h
Adaptive and Composite Thin Glass Panels
Christian Louter, Delft University of Technology

Glass – Projects

11:30 h
Glass Sculpture at Dr. George Robert Grasett Park
Han Yao, Entuitive

11:50 h
Mistral Tower: Value of System Design, Manufacturing and Installation in Cold Bent SSG Units
Viviana Nardini, Sika Services

12:10 h
Qwalala – Monumental sculpture made out of glued glass blocks
Christoph Paech, schlaich bergermann partner

12:30 h
Sana Al-Nour: the development of a unique integrated artwork
Luke Lowings, Carpenter | Lowings A & D

13:00

Lunch Break

14:00 h - 15:00 h

Facade – Structural Design

14:00 h
Nike Flagship Facade – Design, Engineering, and Testing
Daniel A. Vos, Heintges Consulting Architects & Engineers

14:20 h
Behavior of load-bearing glass at elevated temperature
Dániel Honfi, RISE Research Institutes of Sweden


14:40 h
Fused deposition modeling with glass for facade applications
Robert Akerboom, Technische Universität Darmstadt

Special Session – Thin Glass

14:00 h
Design concept for cold bent shell structures made of thin glass
Gordon Nehring, Bundeswehr University Munich

14:20 h
Honeycomb-Paperboard Glass Composite Beams
Michael Drass, Technische Universität Darmstadt

14:40 h
Introducing an edge strength measurement method for Ultra Thin Glass
Matthias Jotz, SCHOTT

Glass – Projects

14:00 h
Glass Bow for the Iran Mall in Tehran
Bernd Stimpfle, formTL ingenieure für tragwerk und leichtbau GmbH

14:00 h
Hidden features of structural glass engineering in a contemporary museum
Kathrin Havemann, Waagner-Biro Stahlbau

14:00 h
Field of Rods: Part 2. Mockup and Performance Testing of TSSA
Lawrence Carbary, Dow Performance Silicones